MUELLER KUEPS email blasts

Want to be added to our new product announcement mailing list? Click here:
Sign up for our Newsletter – Get special offers and updates


November 21st, 2018

# 282 240 Wheel Weight Pliers


The Mueller-Kueps Wheel Weight Plier is a product specifically made to remove sticky wheel weights from aluminum rims. Thin edges grip the wheel weight without damaging the aluminum, leaving no scratches or notches in the metal. The pliers will never touch the wheel as the weights lean on their own tape.

These weights can easily be removed and trashed through the spring-loaded handle. Rubber coated grip provides a comfortable handle. Wheel weights are fast and easy to remove. Made in Germany, this tool is made to last.

September 6th, 2018

# 650 700 Hydraulic Twin/Triple Leg Puller System


The Mueller-Kueps Hydraulic Puller System is ideal for removing all kinds of shaft-fitted parts. These parts include bushings, wheels, etc. By using this Puller System, you extend the life of bearings through a simpler and less frustrating removal.

You can use this tool as a 2 or 3 leg puller with a self-locking principle. This means when you turn the spindle the hydraulic power forces the legs to close (lock) on your part. The forged steel of the legs provides maximum stiffness and can produce more pulling force. With just two fingers you can manually tighten the tool and the compact design will deliver 8-tons of hydraulic ram.

August 1st, 2018

# 603 336 Volkswagen & Audi Pinch Bolt Removal Kit


The #603 336 kit is specifically made to remove the aluminum 4-link locking bolt in a suspension, commonly found in Volkswagen & Audi, seeing as these are notoriously difficult to remove. The main reason is that there is not enough space to get your tool in the area. This 3-step kit helps you make the removal of a stuck pinch bolt fast and easy via the exact central drilling method.

The kit includes a guide, step bit, different drill lengths and a drill sleeve. All these components are used in tandem to remove a rusted and corroded bolt with ease. By pushing the bolt out with the pressure pin, the end of the screw thread cannot be widened. Use with the 290 206 high performance air-hammer for best results. Instructions are available.

July 4th, 2018

# 651 001 Spark & Clow Plug Starter

Fast and easy. Two words to describe installing the first pitch of common rail glow plugs, as well as spark plugs. Forget losing your grip on the plug! Mueller-Kueps has your new best friend in stock.

May 23rd, 2018

# 650 400/460 Press and Pull Sleeve Combination Kit


If you are familiar with our original Press and Pull Kit (#609 400) but are finding that you could really use a big C-Clamp, we have the Press and Pull Combination Kit!

This universal set can be used for extracting and mounting on various vehicles for example: silent bearings, hydraulic bearings, ball bearings, rubber bearings, shaft seals, bearing bushes and more.

This comprehensive kit provides you with 20 sleeves ranging in diameter from 1-3/4″ – 3-1/8″, so that you will always find a sleeve that works. It also includes 4 hardened step discs and 4 spindles. You can stack the sleeves if need be to create extra length.

This kit can be used under a shop press, by hand, and with an impact gun on the C-Clamp and “Vibro-Impact” spindle.

April 9th, 2018

# 432 910 Suspension Wear Indicator


Have you ever had trouble diagnosing what exactly was wrong with the suspension of the car you were working on? Did you use an assortment of pry bars, cheater pipes, wedges or other tools to try and identify the problem?

Mueller-Kueps listened and introduced the 432 910 Suspension Wear Indicator. This tool allows you to SEE, FEEL and HEAR the worn parts in the suspension. Including but not limited to link pin bushings, ball joints, and tie rod ends.

Lift the vehicle off the ground a little ways to have the clearance to put the tool underneath. Then release the car after you have positioned the indicator under 1 of the tires. While half the weight of the car is on the tool, wiggle it back and forth to get a clear picture of the potential problems.

The Suspension Wear Indicator is made of high quality steel with a chrome finish. Using a special technique, the rubber is adhered to the steel, this provides a durable tool which is also resistant to all liquids a shop deals with on a daily basis.

U.S. Patent Pending

March 8th, 2018

# 401 001 Spot Weld Drill

The Mueller-Kueps Spot Weld Drill is made to help you drill through High Strength Steel or regular steel depending on the drill bit used. It operates at 1200 rpms or less which makes your drill bits last longer. Another helpful hint to make your drill bits last longer is to use the center punch and the special cutting oil. You can use the tool to remove spot welds on all flanges.
It also comes with a removable G-Clamp and has adjustable depth to ensure there is no drilling in the second panel.

High quality, double coated HSSE- TICN (High Speed Steel Cobalt Alloyed and Titanium Carbon Nitride).

Highest cutting speed and long lifetime for best profitability. Use for interrupted cuts.

December 21nd, 2017

# 600 300 Complete Kit Glow Plugs Electrode Extraction

If you are trying to cut down on the amount of work you or your employees do on broken glow plug tips, we have brought out the perfect kit for you.

The Mueller-Kueps Glow Plugs Electrode Extraction Kit, No. 600 300, is designed for the extraction of broken glow plug tips in the event of breakage or seizure inside the cylinder head.
This set includes all the tools needed to safely remove the terminal part of the glow plug electrode without damaging the cylinder head. The tool is designed to eliminate the need to disassemble the head.

This kit will save you time, money and a lot of frustration when broken glow plug tips come into the shop.

November 22nd, 2017

# 514 300/2 Wheel Camber Adjuster

Inefficiency is having two people work on one car, when so many more come through a shop daily. There is a way to reduce the labour and time spent on wheel alignment. With the wheel camber adjuster from Mueller-Kueps wheel alignment becomes a one person job.

Place one end on the chassis and the other on the interior rim of the car. When you release the camber, the tool will stop the wheel from pulling inwards and stay there until you are finished. Achieve a more precise adjustment by turning the coupling nut in or out.

July 19th, 2017

# 745 100: Wrench Extender Type 1

Are you struggling with loosening connections in tight, almost impossible to reach places? The Wrench Extender Type 1 makes sure you can finally grasp a connection without arm and hand acrobatics. With a length of 340 mm, you can reach in with a wrench size of up to 24 mm. Also for use with Allen keys and TX.The drop forged steel allows you to put enough pressure on the bolt or other connection to loosen it easily. Meanwhile, a circular 2 prong grip makes sure you do not lose your wrench and the grip on the connection. This saves you both time and extra unnecessary effort, while reducing workplace hazards.